SWC Cardan Shaft utilizing the characteristics of its structure, the two axes can be continuously rotated to transmit torque and motion even the two axes are not on the same axis and axis angle β exists. SWC Cardan Shaft are widely used in various fields. Several large cross-axis universal couplings are mainly different from bearings structure and cross fork heads. In order to ensure the synchroni...

Everything has its industry-specific terminology. Of course, coupling as a component of a machine ,also has professional terms. Here we will explain its the terminology. ◆ Rated torque: refers to the torque capacity that the coupling can continuously transmit. The variable load factor during operation has been taken into account, so there is no need to adjust the rated torque again. Please choose ...

universal joint couplings are just like the joints of human hands and legs, and the structure of the machine is different from humans. They have different functions and different forms. Therefore, the universal couplings used on the machine are far more than ours. The joints of the human body should be diverse. This determines that there are many types of couplings, such as small and precise ...

Cracks or fractures often occur during its works.to those malfunction, we carry out statistical analysis, find out the reason to improve them, so as to prolong the service life ,effectively reduce the equipment failure rate, and ensure equipment stable operating. Why the universal coupling easy broken? (1) Cracks at the fork head of the shaft, which accounted for 60% of the total failure; (2)...

Diaphragm coupling  is also called servo motor coupling. Servo motor coupling is a mechanical part that is used to connect two shafts in different mechanisms (driving shaft and driven shaft)， rotating together to transmit torque.When the machine is running, the two shafts cannot be separated. Only after the machine is stopped, then connection is disassembled, the two shafts can be separated.I...

1.No lubrication required It relies on metal diaphragms to transmit torque and absorb deformation caused by misalignment. There is no relative movement, no friction and wear between different parts, so no need lubrication. Super suitable to the development direction of non oil process equipment. The gear coupling is a rigid movable coupling. It relies on the relative sliding between the surfaces t...

Refers to the state of the centrifugal force that deviates from the transmission shaft system at both ends when the coupling is running. High-quality couplings must strictly control the accuracy index of the coupling dynamic balance    The dynamic balance accuracy index has different national standards according to different coupling types.High-quality couplings such as Cardan Universal ...

There are many heat treatment methods for Universal Joint Coupling. The common ones are anti-rust and blackening on the surface, quenching and tempering in order to change the hardness of steel parts，This article is mainly about nitridation treatments that are not commonly used. Nitridation is the process of nitriding the steel surface.When the ammonia gas is heated, active nitrogen atoms are deco...